Contact Us
HULL HUGR™Traditional round fenders roll up, leaving boats unprotected and they’re bulky to stow. HULL HUGR to the rescue! When boats rock, HULL HUGR stays put. The innovative HULL HUGR protects boats better than 6 traditional fenders. The ingenious patented design enables you to fold it up to a very compact size, easy to stow, or use it as a cushion. Hull Hugr is constructed of UV and puncture resistant marine grade vinyl / polyester tri-laminate. Six blocks of durable closed-cell foam are sealed inside. There are 3 sizes to fit every boat, dock, and slip:
HH-S & SW: 7 1/2 feet long x 15 inches tall, 6 - 12 inch x 6 inch x 2 inch foam bumpers, folds to only 15 inches x 15 inches x 4 inches. For low profile boats, including jet boats, ski boats, bass boats and sailboats. Great for tying or screwing to docks.
HH-S: Blue
HH-SW: White
HH-M & MW: 7 1/2 feet long x 22 inches tall, 6 - 20 inch x 6 inch x 2 inch foam bumpers, folds to only 22 inches x 15 inches x 4 inches. For medium profile boats, pontoons, deck boats, houseboats, sailboats and cruisers up to 30 ft.
HH-M: Blue
HH-MW: White
HH-L & LW: 9 feet long x 26 inches tall, 6 - 24 inch x 6 inch x 2-1/2 inch foam bumpers, folds to only 26 inches x 18 inches x 6 inches. For higher profile boats including cruisers, performance boats, pontoons, deck boats, sailing yachts and houseboats. Great for tall docks.
HH-L: Blue
HH-LW: White
HULL HUGR Modular Flat Fenders
These HULL HUGR Fenders are easy to stow and will not puncture or absorb water. The flat design prevents from them from rolling or riding up. Link 2 or more together with the hook and loop straps provided. Manufactured from 3 layer dual density EVA. They’re great for rafting 2 boats together and very popular for sailboats and runabouts. Hook & Loop Strap and Fender Line included.
HH-20BL: 20 x 8 x 2 in., Blue
HH-20GR: 20 x 8 x 2 in., Gray
HH-24BL: 24 x 12 x 3 in., Blue
HH-24GR: 24 x 12 x 3 in., Gray
HH-36BL: 36 x 12 x 3 in., Blue
HH-36GR: 36 x 12 x 3 in., Gray
HULL HUGR Flat Fender
You’ll love the protection this flat fender gives your boat and the way it stows so compactly under a seat or in a side compartment. The Hull Hugr Flat Fender is 26” long x 6” wide x 2 1/2” thick. Constructed of durable marine grade tri-laminate with a polycarbonate grommet at each end. Hang them vertically or horizontally. Great for mounting to docks and posts too!
HH-1: Blue
HH-1W: White
HH-1B: Black
HULL HUGR Contour Fender
Traditional round fenders protect hulls fairly well, but not gunwales. Ski boats, bass boats and runabouts with step-down gunwales are especially vulnerable to damage from docks. The HULL HUGR Contour Fender hinges to wrap around the gunwale and hull, following the contours of the boat. It can be used as a flat fender too. Size: 24” long x 6” wide x 2 1/2” thick. It is constructed of incredibly durable tri-laminate material with polycarbonate grommets. It stows conveniently under seats or inside storage compartments.
HH-1C: Blue
HH-1CW: White
HH-1CB: Black
HULL HUGR XL Contour Fenders
Now for bigger boats!
Traditional round fenders protect hulls fairly well, but not gunwales. They tend to roll and lift, leaving your boat open to damage. Boats with step-down gunwales are especially vulnerable. HULL HUGR Contour Fenders hinge at the rub rail to wrap around the gunwale and hull, following the contours of the boat. They always stay put, unlike other fenders. They’re constructed of durable tri-laminate covering closed cell foam with 1/2 inch ID polycarbonate grommets. HULL HUGRs stow in half the space of a round fender, under seats or inside storage compartments. Size: 30” long x 6” wide x 4” thick.
HH-30C: Blue
HH-30CW: White
HH-30CB: Black
HULL HUGR Dock Bumper
All HULL HUGR products are manufactured from a UV-resistant and tear-proof vinyl / polyester tri-laminate. These dock bumpers are 24” x 4” x 2 1/2” and are filled with high-density closed-cell polyethylene foam. There are 4 corrosion-proof polycarbonate grommets for mounting to docks. White.
HHB-24W: White
HULL HUGR Dock Corner Bumper
These dock corner bumpers measure 10” x 10” x 4” x 2 1/2”. They’re manufactured from UV-resistant and tear-proof vinyl/polyester tri-laminate, filled with high-density closed-cell polyethylene foam. There are 4 corrosion-proof polycarbonate grommets, 1 in each corner, for mounting to docks. White.
HHB-C1W: White
HULL HUGR PWC FENDER
Docking a PWC has never been safer with the introduction of the HULL HUGR PWC Fender. Engineered specifically for PWCs, it hinges in the center to better protect PWC bodies from docks designed for bigger boats. It hooks under the rub rail with a molded acetyl hook integrated into the back of the fender. If your PWC has them, you’ll want to connect the top of the fender to a cleat or ski eye with the adjustable strap and vinyl dipped steel hook provided. If not, simply thread the strap though the rubber block provided and place it inside the PWC’s storage compartment, then shut it. The block anchors the fender strap perfectly and will not damage the body. We recommend 2 fenders per PWC. Fits all PWCs.
HH-P1B: Black
Suction Cup Fender Straps
Great for Boats and Personal Watercraft
Attach your boat fenders exactly where you need the protection. Giant 3-1/4” suction cups attach to gelcoat or windshields quickly and easily. Perfect for most boats and personal watercraft where cleats never seem to be where you need them. Durable 1” wide straps adjust up to 24” long. Fenders not included. 2 per package.
SF-1C
NO-SLIP™ Fender Straps
Great for Boats and Personal Watercraft
No more tying and untying knots! Attach boat fenders to rails and cleats quickly and securely with these fender straps. The NO-SLIP™ pads sewn to the underside of the straps minimize sliding along rails. Easily adjust the length in seconds from 6 in. to 40 in. to fit most boats and docking situations. Color: white. 2 per package.
SF-2
Copyright 2008 KwikTek, Inc - All Rights Reserved